Security Screen Options - Dell Precision 3520 Owner's Manual

Security screen options

Option Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
Default setting: Not set
System Password Allows you to set, change or delete the system password.
Default setting: Not set
M.2 SATA SSD Allows you to set, change, or delete the M.2 SATA SSD password.
Password
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password Allows you to determine the minimum and maximum length of Administrator and System passwords.
Configuration
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
•
•
Default setting: Disabled
Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set.
Changes If disabled the setup options are locked by the admin password.
UEFI Capsule Allows yout to control whether this system allows BIOS updates via UEFI capsule update packages.
Firmware Updates
•
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
•
•
•
NOTE: You must set the admin password before you set the system or hard drive password. Deleting
the admin password automatically deletes the system password and the hard drive password.
NOTE: Successful password changes take effect immediately.
NOTE: Successful password changes take effect immediately.
NOTE: Successful password changes take effect immediately.
NOTE: If Strong Password is enabled, Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
Disabled
Reboot bypass
Enable UEFI Capsule Firmware Updates (enabled by default)
TPM On (enabled by default)
Clear
PPI Bypass for Enabled Commands(enabled by default)
System setup options 65