Enabling Ethernet Oam Remote Loopback On The Port; Rejecting The Ethernet Oam Remote Loopback Request From A Remote Port; Displaying And Maintaining Ethernet Oam - HP 5900 Series Configuration Manual

Enabling Ethernet OAM remote loopback on the port

Step
1. Enter system view.
2. Enter Layer 2/Layer 3
Ethernet port view.
3. Enable Ethernet OAM remote
loopback on the port.
Rejecting the Ethernet OAM remote loopback request from a
remote port
The Ethernet OAM remote loopback function impacts other services. To solve this problem, you can
disable a port from being controlled by the Loopback Control OAMPDUs sent by a remote port. The local
port then rejects the Ethernet OAM remote loopback request from the remote port.
To reject the Ethernet OAM remote loopback request from a remote port:
Step
1. Enter system view.
2. Enter Layer 2 Ethernet port
view.
3. Reject the Ethernet OAM
remote loopback request from
a remote port.

Displaying and maintaining Ethernet OAM

Execute display commands in any view and reset commands in user view:
Purpose
Display information about an Ethernet OAM
connection.
Display Ethernet OAM configuration.
Display the statistics on critical events after an Ethernet
OAM connection is established.
Command
system-view
interface interface-type
interface-number
oam remote-loopback start
Command
system-view
interface interface-type
interface-number
oam remote-loopback
reject-request
Command
display oam { local | remote } [ interface
interface-type interface-number ]
display oam configuration [ interface interface-type
interface-number ]
display oam critical-event [ interface interface-type
interface-number ]
10
Remarks
N/A
N/A
By default, Ethernet OAM remote
loopback is disabled.
Remarks
N/A
N/A
By default, a port does not reject
the Ethernet OAM remote
loopback request from a remote
port.
This setting does not affect the
loopback test that has been
performed on the port. It takes
effect when the next loopback
starts on the port.