HP 5900 Series Configuration Manual page 145

[SwitchB-Vlan-interface2] vrrp vrid 1 track 1 switchover
[SwitchB-Vlan-interface2] return
Verifying the configuration
# Display detailed information about VRRP group 1 on Switch A.
<SwitchA> display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
# Display detailed information about VRRP group 1 on Switch B.
<SwitchB> display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
VRRP Track Information:
Track Object
# Display information about track entry 1 on Switch B.
<SwitchB> display track 1
Track ID: 1
State: Positive
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Tracked object:
BFD session mode: Echo
Outgoing interface: Vlan-interface2
VPN instance name: -
Remote IP: 192.168.0.101
Local IP: 192.168.0.102
The output shows that when the status of the track entry becomes Positive, Switch A is the master and
Switch B the backup.
: Standard
: 1
: Up
: 110
: Yes
: None
: 192.168.0.10
: 0000-5e00-0101
: 192.168.0.101
: Standard
: 1
: Up
: 100
: Yes
: 2200ms left
: None
: 192.168.0.10
: 192.168.0.101
: 1 State : Positive
139
Adver Timer : 100
State : Master
Running Pri : 110
Delay Time : 0
Adver Timer : 100
State : Backup
Running Pri : 100
Delay Time : 0
Switchover