HP 5900 Series Configuration Manual page 142

High availability configuration guide
Hide thumbs Also See for 5900 Series:
Table of Contents

Advertisement

Verifying the configuration
# Ping Host B from Host A to verify that Host B is reachable. (Details not shown.)
# Display detailed information about VRRP group 1 on Switch A.
[SwitchA-Vlan-interface2] display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
# Display detailed information about VRRP group 1 on Switch B.
[SwitchB-Vlan-interface2] display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
The output shows that in VRRP group 1, Switch A is the master, and Switch B is a backup. Packets from
Host A to Host B are forwarded through Switch A.
# Disconnect the link between Switch A and Switch C, and verify that Host A can still ping Host B.
(Details not shown.)
# Display detailed information about VRRP group 1 on Switch A.
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
: Standard
: 1
: Up
: 110
: Yes
: Simple
: 10.1.1.10
: 0000-5e00-0101
: 10.1.1.1
: 1
State : Positive
: Standard
: 1
: Up
: 100
: Yes
: 2200ms left
: Simple
: 10.1.1.10
: 10.1.1.1
: Standard
: 1
: Up
: 110
: Yes
136
Adver Timer
: 500
State
: Master
Running Pri
: 110
Delay Time
: 5
Key
: ******
Adver Timer
: 500
State
: Backup
Running Pri
: 100
Delay Time
: 5
Key
: ******
Adver Timer
: 500
State
: Backup
Running Pri
: 80
Delay Time
: 5
Pri Reduced : 30

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5920 series

Table of Contents