HP 5900 Series Configuration Manual page 159

High availability configuration guide
Hide thumbs Also See for 5900 Series:
Table of Contents

Advertisement

Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
# Display detailed information about VRRP group 1 on Switch B.
[SwitchB-Vlan-interface2] display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
The output shows that in VRRP group 1, Switch A is the master, and Switch B is a backup. Packets from
Host A to Host B are forwarded through Switch A.
# Shut down the uplink interface VLAN-interface 3 on Switch A.
[SwitchA-Vlan-interface2] interface vlan-interface 3
[SwitchA-Vlan-interface3] shutdown
# Ping Host B from Host A to verify that Host B is reachable. (Details not shown.)
# Display detailed information about VRRP group 1 on Switch A.
[SwitchA-Vlan-interface3] display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
VRRP Track Information:
Track Object
# Display detailed information about VRRP group 1 on Switch B.
: Up
: 110
: Yes
: None
: 10.1.1.10
: 0000-5e00-0101
: 10.1.1.1
: 1
: Standard
: 1
: Up
: 100
: Yes
: 2200ms left
: None
: 10.1.1.10
: 10.1.1.1
: Standard
: 1
: Up
: 110
: Yes
: 2200ms left
: None
: 10.1.1.10
: 10.1.1.2
: 1
153
State
: Master
Running Pri
: 110
Delay Time
: 0
State : Positive
Adver Timer
: 100
State
: Backup
Running Pri
: 100
Delay Time
: 0
Adver Timer
: 100
State
: Backup
Running Pri
: 80
Delay Time
: 0
State : Negative
Pri Reduced : 30
Pri Reduced : 30

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5920 series

Table of Contents