Scan Operation; Channel Groups - Icom IC-M802 Instruction Manual

3
SELECTING A CHANNEL/FREQUENCY
D D Using the keypad
Direct channel selection via the keypad is available
for quick channel selection.
q Make sure no "å" indicator appears in the display.
• If it appears, push [RX
w Enter the desired channel number via the keypad.
• A user channel is selected when channel 1–160 is
input (max. number may be optionally restricted).
• An ITU SSB channel is selected when channel num-
bers higher than 401 are input (not available for some
versions).
• An ITU FSK channel is selected when channel num-
bers higher than 4001 are input (not usable according
to set mode setting).
• When selecting an ITU simplex channel, push [0] three
times instead of the "–" input.
(e.g. When selecting the channel 4-1;
— push [4 ], [0], [0], [0] then [1
SP
e Push [ENT
] to select the channel.
CE
D D Using scan function
(some versions do not have these functions)
The transceiver has automatic channel or frequency
change capability (scan function). There are 3 types
of scan functions available to suit your needs.
Channel scan/Channel resume scan
ch 2
ch 1
ch 5
Programmed scan (optional)
ch 159

CHANNEL GROUPS

Channel No. Description
1 to 160 User ch.*
401 to 427 4 MHz ITU duplex ch.
4-1 to 4-9 4 MHz ITU simplex ch.
601 to 608 6 MHz ITU duplex ch.
6-1 to 6-9 6 MHz ITU simplex ch.
801 to 832 8 MHz ITU duplex ch.
8
] to delete it.
CLAR
].)
NB
ch 3
ch 4
When resume OFF;
scan is cancelled whe
transmitting
When resume ON;
scan pauses for 30 sec
then resumes
transmitting
Scans the frequency rang
between the programme
ch 160
frequencies on channel
159 and 160.
Scans fast when squelch i
closed and slowly whe
squelch is open.
Channel No.
1 8-1 to 8-9
1201 to 1241
12-1 to 12-9
1601 to 1656
16-1 to 16-9
1801 to 1815
* 1 [GRP] selector changes in 20 channels steps. *
[EXAMPLE]: Selecting channel 158
Channel scan and channel resume scan increase
channels within a 5 channel range such as Ch 1 to
Ch 5, Ch 156 to Ch 160, etc. in user channels; or all
channels in the group of ITU channels.
Programmed scan (optional) scans frequencies
within the frequency range between user channels
159 and 160.
Scan selection is available in set mode. See p. 00 for
scan selection.

SCAN OPERATION

q Rotate [GRP] and [CH] selectors to select your de-
sired channel group.
afte
• Or use the keypad and [
• This operation is not necessary for programmed scan.
w Push [F] then [2
function, if programmed scan is selected.
• A user channel is selected when channel 1–160 is
input (max. number may be optionally restricted).
e Push [F] then [3
r To stop the scan, repeat step e again.
• Pushing other switches also stops the scan.
Description Channel No.
8 MHz ITU simplex ch. 18-1 to 18-9
12 MHz ITU duplex ch. 2201 to 2253
12 MHz ITU simplex ch. 22-1 to 22-9
16 MHz ITU duplex ch. 2501 to 2510
16 MHz ITU simplex ch. 25-1 to 25-9
18 MHz ITU duplex ch. 4001 to 25040 ITU FSK duplex ch.*
R X J 3 E
D S C W a t c h
C H - - - G P S - - -
U T C 1 6 : 2 3
L a t 4 5 5 9 ' N
L H L o n 1 3 4 4 4 ' E
R X J 3 E
D S C W a t c h
C H - - - G P S - - -
U T C 1 6 : 2 3
L a t 4 5 5 9 ' N
L H L o n 1 3 4 4 4 ' E
R X J 3 E
D S C W a t c h
C H - - - G P S - - -
U T C 1 6 : 2 3
L a t 4 5 5 9 ' N
L H L o n 1 3 4 4 4 ' E
R X J 3 E
D S C W a t c h
C H - - - G P S - - -
U T C 1 6 : 2 3
L a t 4 5 5 9 ' N
L H L o n 1 3 4 4 4 ' E
R X J 3 E S I M P
D S C W a t c h
C H - - - G P S - - -
U T C 1 6 : 2 3
L a t 4 5 5 9 ' N
L H L o n 1 3 4 4 4 ' E
ENT] for direct selection.
CE
] to turn OFF the squelch
SQL
] to start the scan.
SCAN
Description
18 MHz ITU simplex ch.
22 MHz ITU duplex ch.
22 MHz ITU simplex ch.
25 MHz ITU duplex ch.
25 MHz ITU simplex ch.
2 SITOR use— no group separation.
2