260
Fuses and light bulbs
Changing light bulbs in the rear light unit
– To gain access to the light bulbs, unscrew the middle part of
the rear light unit and push away the catch
– Replace the defective light bulb.
– To replace the light bulb of the parking light, turn the bulb
connector of the light bulb
direction of the arrows on the housing) and take it out of the
housing
– Replace the light bulb, put the bulb connector back into the
housing and turn it to the right up to the stop (in the opposite
direction of the arrows on the housing).
– Screw the middle part of the rear light unit onto the housing
⇒ fig.
Fig. 192 Removing the
– Connect the plug connection and re-insert the rear light unit.
middle part of the rear
light unit
– Screw the rear light unit tight
Fitting position of the light bulbs in the rear light unit
1 - Brake light
2 - Turn signal light
3 - Reversing lights
4 - Rear fog light
5 - Parking lights
Fig. 193 Rear light
unit: Installing the light
bulbs
⇒ fig.
192.
A
to the left up to the stop (in the
5
⇒ fig.
193.
192.
⇒ page 259, fig.
190.
⇒ fig. 193