Skoda roomster Owner's Manual page 118

The stored speed will be cancelled in the memory. You then have to re-
store the desired speed.
One can reduce the speed in the usual manner. The system is switched
off temporarily by actuating the brake or clutch pedal ⇒ page 117.
WARNING
First ensure that it is not too high for the traffic conditions which
exist at that moment before resuming the stored speed.
Changing a stored speed
You can also change the speed of the vehicle without
depressing the accelerator.
Faster
– You can increase the stored speed without depressing the
accelerator, by pressing the rocker button
fig. 104 into the RES position.
– The speed of the car will increase continuously if you hold the
rocker button pressed in the RES position. Once the car has
reached the desired speed, release the rocker button. The set
speed is then stored in the memory.
Slower
– You can reduce the stored speed by pressing the rocker
A
button in the SET position.
B
Using the system Safety
– Holding down the rocker button pressed in the SET position
– If you release the rocker button when the car is travelling at a
Switching off the cruise control system temporarily
– You can switch off temporarily the cruise control system, if
– You can switch off temporarily the cruise control system, if you
A ⇒ page 116,
B
The set speed remains stored in the memory.
Press the rocker button
stored speed after releasing the clutch or brake pedal.
First ensure that it is not too high for the traffic conditions which
exist at that moment before resuming the stored speed.
Driving Tips General Maintenance
will cause the speed of the vehicle to reduce continuously.
Once the car has reached the desired speed, release the
rocker button. The set speed is then stored in the memory.
speed of less than 30 km/h, the speed is not stored, the
memory is erased. It is then necessary to again store the
A
speed with the rocker button
increase in speed of the vehicle to more than 30 km/hour.
you depress the brake or clutch pedal.
A
press the switch in the middle position.
A
A
in the position RES for the resumptionof the
B
WARNING
Breakdown assistance
Starting-off and Driving
in the position SET after an
B
Technical Data
117