Skoda roomster Owner's Manual page 248

Installing the towing eye
– Grasp the protective grille at the point marked with the arrow
⇒ fig.
and take it out
– Screw in the towing eye by hand to the left up to the stop
⇒ fig.
176.
– Tighten up the towing eye using the wheel wrench (push the
wheel wrench through eye).
Removal of the towing eye
– Unscrew the towing eye.
– Put the protective grille in place on the side opposite the
marking.
– Press into place the protective grille onto the side facing the
marking.
– The protective grille must engage firmly.
Using the system Safety
175.
Driving Tips
Rear towing eye
The rear towing eye is located below the rear bumper on the right
⇒ fig.
177.
Tow-starting a vehicle
If the engine does not start, we generally do not recommend to
tow-start your vehicle. One should attempt to start the engine
using jump start cables ⇒ page 243 or call on the services of the
SERVICE mobile.
If your vehicle has to be towed:
– Engage 2nd or 3rd gear with the vehicle stationary.
– Depress the clutch pedal fully and keep it depressed.
General Maintenance Breakdown assistance
Breakdown assistance 247
Fig. 177 Rear towing
eye
Technical Data