6 Hooking Up the TV/VCR
1
Connect an antenna or cable
signal to your TV/VCR using one
of the following connections.
A.
Hooking Up Your TV/VCR With a
Cable Signal or Outdoor Antenna
B.
Hooking Up Your TV/VCR
With a Cable Box
To view any channel, set the TV/VCR to the
Cable Box output channel (channel 03 or 04).
Then, select channels at the Cable Box.
Connect a Cable signal
or an antenna to the
ANT(enna) Jack.
Connect the Cable signal to
the IN Jack on the Cable Box.
Connect an RF coaxial cable (75-
ohm, not supplied) to the OUT Jack
on the Cable Box and to the
ANT(enna) Jack on the TV/VCR.
RF coaxial cable
(not supplied)