Rerecording (Tape Duplication) - Philips CCC 090AT Owner's Manual

32 Rerecording (Tape Duplication)

AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
1
Make the connections shown above, using audio and video
cables (not supplied). Connect the source unit (VCR or
camcorder) to a power source after connections are made.
2
The source unit will play your tape. Insert a prerecorded tape in
the source unit. If playback begins, press the STOP button on the
unit.
3
The TV/VCR will record your tape. Insert a blank tape in the
TV/VCR. Make sure the tape's record tab is intact. The TV/VCR
power will turn on automatically.
4
Point the TV/VCR remote control at the TV/VCR. Press
Number buttons 0, 0 so that A/V IN appears on the screen.
The TV/VCR is now in Line Input mode.
5
Point the TV/VCR remote control at the TV/VCR. Press the
SPEED button until the desired tape speed (SP or SLP)
appears on the screen.
6
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
7
To stop copying, press the STOP/EJECT button on the
TV/VCR, then stop the tape on the source unit (VCR or
camcorder).
AUDIO and VIDEO In
Jacks on TV/VCR
Helpful Hints
• Unauthorized recording of copyright-
ed television programs, video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws.
• Different brands of equipment might
operate differently.
• Make sure all connections are secure.
Otherwise, you might not record both
picture and sound.
• Programs that are copyright protect-
ed might not record clearly.
• You can use this connection, too, if
you want to watch programming
from another piece of video equip-
ment. For example, connect a VCR,
DVD player, or camcorder to the
TV/VCR as shown above. Select chan-
nel 00 (A/V IN) at the TV/VCR, then
press PLAY on the other equipment.