Remote Control Buttons - Philips CCC 090AT Owner's Manual

22 Remote Control Buttons

CLEAR Button
Press to erase incorrect data when programming TV/VCR func-
tions. Also, press to reset the real-time counter to 0:00:00.
Details are on page 41.
POWER Button
Press to turn on or off the TV/VCR.
Number Buttons
Use to select channels and to program TV/VCR functions (such as
setting the clock).
Cable Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will be selected after a brief delay. (There
also may be a brief delay when you select channels 10, 11, and 12.) If
you want to select channels 100 and above, enter channel numbers as a
three-digit number. For example, to select channel 117, press 1, 1, 7.
Antenna Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 5, press 0,5. If you only press the
Number 5 button, channel 5 will be selected after a brief delay. You
may only select channels 2-69.
SLEEP/WAKE UP Button
Press to set the Sleep Timer. Details are on page 44. Press to set
the Wake Up Timer. Details are on page 45.
PLAY/ Button
Press to play a tape. Details are on page 29. Press to release Search
or Still mode and return to normal playback. Details are on page
42. Press to select an item in the menu.
ALT. CH (Alternate Channel) Button
Press to return to the TV channel you were viewing immediately
before switching to your current channel.
F.FWD/B Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on the screen. Details are on page 42.
Press to change the setting of a menu item or to go to the next
menu.
SPEED Button
Press to select the recording speed (SP or SLP). Details are on
page 30.
MUTE Button
Press to eliminate the TV/VCR's sound. Press again to return to
the previous volume level.
VOL(ume) o o /p p Buttons
Press to adjust the sound level. If you press the VOL(ume) o o /p p
buttons when the sound is muted, the sound will be restored.