Philips CCC 090AT Owner's Manual page 38

38 A-B Repeat Play
Follow these steps to program the TV/VCR to play the material
between two specified points (A and B) on a tape over and over
again.
1
Insert a tape in the TV/VCR.
2
Press the MENU button.
PRIM. SETUP PRESS
> B
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
3
Press the PLAY/ button or the STOP/
VCR SETUP, then press the F.FWD/B button.
VCR SETUP
ONE TIME PLAY [ON]
>
REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE B
TO END PRESS EXIT
4
Press the PLAY/ button or the STOP/
REPEAT PLAY.
VCR SETUP
ONE TIME PLAY [ON]
REPEAT PLAY
>
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE B
TO END PRESS EXIT
5
Press the F.FWD/B button repeatedly so that A-B
appears beside REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY [A-B]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
SELECT KL CHOOSE B
TO END PRESS EXIT
1
2
button to select
button to select
• To cancel A-B Repeat Play, set ONE
TIME PLAY to ON. To set ONE
TIME PLAY to ON, follow steps 2-3
above. Then, press the PLAY/o but-
ton or the STOP/p button to select
ONE TIME PLAY. Press the
F.FWD/B button so that ON
appears beside ONE TIME PLAY.
Then, press the STATUS/EXIT but-
ton.
• The end position (B) must be later
on the tape than the start position
(A).
Insert a tape in the TV/VCR.
3-5
Helpful Hints