A-B Repeat Play - Philips CCC 090AT Owner's Manual

6
Press the STATUS/EXIT button to remove the menu. A-B
REPEAT will appear on the screen. Beneath it, the letter A will
flash beside the real-time counter.
.
A-B REPEAT
A 0:12:34
7
Play, fast forward, or rewind the tape to the position at
which you want to begin playback. Stop the tape, then
press the MEMORY button to set the start position (A).
The flashing A will become a flashing B.
.
A-B REPEAT
B 0:00:00
8
Play or fast forward the tape to the position at which you
want playback to end. Stop the tape, then press the
MEMORY button to set the end position (B).
The length of time between the start position (A) and the end
position (B) must be at least three minutes.
9
The TV/VCR will immediately rewind the tape to the start posi-
tion (A) and repeat playback to the end position (B) over and
over.
(TV programming will appear while the tape is rewinding.)
A-B Repeat Play (cont'd) 39
6
Helpful Hints
• You can not reset or memorize the
counter when you are using this
feature.
• Ejecting the tape or pressing the
REC(ord)/OTR button will cancel

A-B Repeat Play.

• A-B REPEAT will not appear on the
screen at step 6 if a tape is not in
the TV/VCR. NO CASSETTE will
flash on the screen briefly.
• You cannot rewind or fast forward
beyond points A or B when you are
using this feature.
• A-B Repeat Play will be retained if
you turn off the TV/VCR power.
7-8