Vlan Memberships - Linksys LGS308 User Manual

VLAN Memberships

The VLAN Memberships page displays the VLAN memberships of the ports in various
presentations. You can use them to add memberships to or remove memberships from the VLANs.
When a port is forbidden default VLAN membership, that port is not allowed membership in any
other VLAN. An internal VID of 4095 is assigned to the port.
To forward packets properly, intermediate VLAN-aware devices that carry VLAN traffic along the
path between end nodes must be manually configured.
Untagged port membership between two VLAN-aware devices with no intervening VLAN-aware
devices, must be to the same VLAN. In other words, the PVID on the ports between the two
devices must be the same if the ports are to send and receive untagged packets to and from the
VLAN. Otherwise, traffic might leak from one VLAN to another.
Frames that are VLAN-tagged can pass through other network devices that are VLAN-aware or
VLAN-unaware. If a destination end node is VLAN-unaware, but is to receive traffic from a VLAN,
then the last VLAN-aware device (if there is one), must send frames of the destination VLAN to
the end node untagged.
Use the VLAN Memberships page to display and configure the ports within a specific VLAN.
To assign a port to one or more VLANs:
1. Click Configuration > VLAN Management > VLAN Memberships.
2. Select VLAN ID and interface type (Port or LAG), and click Search.
84