Ipv4-Based Ace - Linksys LGS308 User Manual

IPv4-Based ACE

To add rules (ACEs) to an IPv4-Based ACL:
1. Click Configuration > Access Control List > IPv4-Based ACE.
2. Select an ACL, and click Search. All currently-defined IP ACEs for the selected ACL are
displayed.
3. Click Add.
4. Enter the parameters.
ACL Name—Displays the name of the ACL.
•
• ACE Priority—Enter the priority. ACEs with higher priority are processed first.
Action on Match Packets—Select the action assigned to the packet matching the
•
ACE.
• The options:
• Protocol—Select to create an ACE based on a specific protocol or protocol ID.
Select Any IPv4 to accept all IP protocols. Otherwise select one of the following
protocols from the drop-down list:
o Permit—Forward packets that meet the ACE criteria.
o Deny—Drop packets that meet the ACE criteria.
o Shutdown—Drop packet that meets the ACE criteria and disable the port
to which the packet was addressed. Ports are reactivated from the Port
Management page.
o ICMP—Internet Control Message Protocol
o IGMP—Internet Group Management Protocol
o IP in IP—IP in IP encapsulation
o TCP—Transmission Control Protocol
o UDP—User Datagram Protocol
174