Linksys LGS308 User Manual page 67

The LLDP-MED TLVs to be advertised can be selected in the LLDP MED Port Settings page, and
the management address TLV of the device may be configured to be advertised.
To configure the LLDP port settings:
1. Click Configuration > Port Management > Discovery – LLDP > Feature Configuration.
The following fields are displayed (only fields that do not appear in the Edit page are
described):
• Interface—The port to edit.
• LLDP MED Status—Enabled or disabled.
Number of neighbors—Number of neighbors discovered.
•
• Neighbor Capability—Displays the primary functions of the neighbor; for example:
Bridge or Router.
• Local PoE—Local PoE information advertised.
• Neighbor PoE—PoE information advertised by the neighbor.
2. Enter the following fields.
LLDP Status—Select to enable LLDP on the device (enabled by default).
•
• LLDP Frame Handling—If LLDP is not enabled, select the action to be taken if a
packet that matches the selected criteria is received:
3. Select a port and click Edit.
• Port—Select the port to edit.
LLDP Status—Select the LLDP publishing option for the port. The values are:
•
• Available Optional TLVs—Information to be published by the device.
Advertise Optional TLVs—Select the information to be published by the device by
•
moving the TLV from the Available Optional TLVs list. The available TLVs contain
the following information:
o power priority—Port power priority
o power value—Port power value
o power priority—Port power priority
o power value—Port power value
o Filtering—Delete the packet.
o Flooding—Forward the packet to all VLAN members.
o Tx Only—Publishes but does not discover.
o Rx Only—Discovers but does not publish.
o Tx & Rx—Publishes and discovers.
o Disable—Indicates that LLDP is disabled on the port.
67