Xerox DocuColor 2240 Service Manual page 1252

3. Locate the 10-pin connector (P343)
Figure 2 Connector P343
4. Plug in the 10-pin connector (J343) from the Foreign Interface
Figure 3 Connecting P/J343
5. Remove the backing from the Velcro™ on the rear of the Foreign Interface and attach the
the Foreign Interface in a convenient location on the rear of the machine.
6. Switch on the machine and confirm that the UI displays Insert Coin or Xerox Card.
7. If it is necessary to disable the Foreign Interface, change the value in NVM location 850-
001 from 1 to 0.
Initial issue
DC 3535/2240/1632
(Figure 2).
Connector
P343
(Figure 3).
J343 Connector/Harness
from Foreign Interface
02/03
9-7
Installation
Foreign Interface Installation