Configuration Procedure - HP 5920 series Fundamentals Configuration Manual

Single-line banner.
•
A single-line banner must be input in the same line as the command. The start and end delimiters
for the banner can be any printable character, but they must be the same and must not be included
in the banner. The input text, including the command keywords and the delimiters, cannot exceed
510 characters. Do not press Enter before you input the end delimiter.
For example, you can configure the shell banner "Have a nice day." as follows:
<System> system-view
[System] header shell %Have a nice day.%
Multi-line banner.
•
A multi-line banner can be up to 2000 characters. To input a multi-line banner, use one of the
following methods:
Method 1—Press Enter after the last command keyword. At the system prompt, enter the banner
and end the last line with the delimiter character %. For example, you can configure the banner
"Have a nice day. Please input the password." as follows:
<System> system-view
[System] header shell
Please input banner content, and quit with the character '%'.
Have a nice day.
Please input the password.%
Method 2—After you type the last command keyword, type any single printable character as
the start delimiter for the banner and press Enter. At the system prompt, type the banner and
end the last line with the same delimiter. For example, you can configure the banner "Have a
nice day. Please input the password." as follows:
<System> system-view
[System] header shell A
Please input banner content, and quit with the character 'A'.
Have a nice day.
Please input the password.A
Method 3—After you type the last command keyword, type the start delimiter and part of the
banner and press Enter. At the system prompt, enter the rest of the banner and end the last line
with the same delimiter. For example, you can configure the banner "Have a nice day. Please
input the password." as follows:
<System> system-view
[System] header shell AHave a nice day.
Please input banner content, and quit with the character 'A'.
Please input the password.
A

Configuration procedure

To configure banners:
Step
1. Enter system view.
2. Configure the legal banner.
Command
system-view
header legal text
141
Remarks
N/A
By default, the device does not have a
banner.