Digital Diagnostics Monitoring - Alcatel-Lucent 7750 Configuration Manual

Service router
Hide thumbs Also See for 7750:
Table of Contents

Advertisement

Digital Diagnostics Monitoring

Digital Diagnostics Monitoring
Some Alcatel-Lucent SFPs, XFPs, QSFPs, CFPs and the MSA DWDM transponder have Digital
Diagnostics Monitoring (DDM) capability where the transceiver module maintains information
about its working status in device registers including:
For the case of QSFP and CFPs, DDM Temperature and Supply voltage is available only at the
Module level (to be shown in
The section called
DDM and DDM Lane information:
The QSFP and CFPs, the number of lanes is indicated by DDM attribute "Number of Lanes: 4".
Subsequently, each lane threshold and measured values are shown per lane.
If a given lane entry is not supported by the given QSFP or CFP specific model, then it will be
shown as "-" in the entry.
A sample QSFP and CFP lane information is provided below:
Transceiver Data
Transceiver Type
Model Number
TX Laser Wavelength: 1310 nm
Number of Lanes
Connector Code
Manufacture date
Serial Number
Part Number
Optical Compliance : 40GBASE-LR4
Link Length support: 10km for SMF
===============================================================================
Transceiver Digital Diagnostic Monitoring (DDM)
===============================================================================
-------------------------------------------------------------------------------
Temperature (C)
Supply Voltage (V)
===============================================================================
===============================================================================
Transceiver Lane Digital Diagnostic Monitoring (DDM)
===============================================================================
Page 32
Temperature
Supply voltage
Transmit (TX) bias current
TX output power
Received (RX) optical power
Table
Statistics Collection on page 36
: QSFP+
: 3HE06485AAAA01
: 4
: LC
: 2012/02/02
: 12050188
: DF40GELR411102A
5.
shows the following QSFP and CFP sample
ALU
IPUIBMY3AA
Diag Capable
Vendor OUI
Media
Value High Alarm
High Warn
+35.6
+75.0
+70.0
3.23
3.60
High Alarm
High Warn
7750 SR Interface Configuration Guide
: yes
: e4:25:e9
: Ethernet
Low Warn
Low Alarm
+0.0
3.50
3.10
Low Warn
Low Alarm
-5.0
3.00

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents