Ethernet Access Port - Alcatel-Lucent 7750 Configuration Manual

Interfaces

Ethernet Access Port

Services are configured on access ports used for customer-facing traffic. If a Service Access Port
(SAP) is to be configured on a port, it must be configured as access mode. When a port is
configured for access mode, the appropriate encapsulation type can be specified to distinguish the
services on the port. Once a port has been configured for access mode, multiple services may be
configured on the port.
A:ALA-A>config>port# info
----------------------------------------------
----------------------------------------------
A:ALA-A>config>port#
Page 198
description "Ethernet access port"
access
egress
pool
slope-policy "slopePolicy1"
exit
exit
exit
network
egress
pool
slope-policy "slopePolicy2"
exit
exit
exit
ethernet
mode access
encap-type dot1q
exit
no shutdown
7750 SR Interface Configuration Guide