Oa58Xx-Nw Routers; Characteristics; Power Supply; Hardware Monitoring - Alcatel-Lucent OmniAccess 5840 Installation Manual

Oa58xx-nw
Hide thumbs Also See for OmniAccess 5840:
Table of Contents

Advertisement

Alcatel-Lucent
Chapter 2 OA58XX-NW Routers
The OA58XX-NW router family consists of the following devices:
• OmniAccess 5840
OA5840 ESR modular chassis base model has 2 x GigE WAN, 8 x GigE LAN, 1x DSL slot, 1 x AIC slot. See part
number suffix for power cord plug type.
• OmniAccess 5850
OA5850 ESR modular chassis base model has 2 x GigE WAN, 8 x GigE LAN, 1x DSL slot, 2 x AIC slots. See SW
licenses available. See part number suffix for power cord plug type.
• OmniAccess 5850D
OA5850D ESR modular chassis with 250 GB HD memory storage for applications. See base model for ports. See
SW licenses available. See part number suffix for power cord plug type.

2.1 Characteristics

The OA58XX-NW routers are modular devices that combine router and switch functions in a single device. They
have been designed for a corporate environment, and include advanced security among their characteristics. The
OA58XX-NW routers incorporate encryption hardware.
The OA58XX-NW executes the ALU ESR-OS, which runs in all ALU router families and is characterized by a wide
variety of functionalities. It is especially designed to satisfy the access requirements to corporate data networks.
ESR-OS offers management capabilities, the possibility of implementing Quality of Service mechanisms (both at the
link layer and at the network layer) and security mechanisms, the potential to create Virtual Private Networks through
IPSec or L2TP, plus an extensive range of protocols and IP routing functionalities.
The OA58XX-NW router family can be expanded by means of a AIC card, allowing you to increase the range of in-
terfaces in the device.
This manual shows you how to install and connect these devices.

2.1.1 Power supply

For further information on the different OA58XX-NW power supplies, please see
ponents and Power Supply

2.1.2 Hardware Monitoring

The only way to monitor the OA58XX-NW router family hardware is through the LEDs on the front panel. These in-
dicate the state of the hardware components, if there is connectivity, data flow, etc.
For further information on the LED panel, please see
OA58XX-NW Router
on page 4.
Components
Power Source
on page 4 in the following chapter.

2 OA58XX-NW Routers

on page 16
inCom-
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniaccess 5850Omniaccess 5850d

Table of Contents