OPERATION
PREPARATION
POWER UP
FILLING THE
WASH TUB
07610-004-43-79-D
OPERATING INSTRUCTIONS
Before operating the machine, verify the following:
1. Strainers are in place and clean.
2. Wash and rinse arms are screwed securely into place and end-caps are tight.
3. Wash and rinse arms rotate freely.
4. Chemical levels are correct.
To energize the machine, turn on the power at the service breaker. The voltage should
have been previously verified as correct. If not, the voltage must be verified before
energizing the machine.
1. Press the "Power" button.
2. The machine will automatically begin the fill cycle.
3. Once the wash tub is filled, the machine is ready for operation.
4. Wait for wash temperature to display at least 155 °F and for the status to display
"READY" before operating the machine.
1 5 5 F
R E A D Y
C Y C L E 1
11