System Tools
2.2
Remote Management
Choose the menu System Tools > Admin Setup > Remote Management and click Add to
load the following page.
Figure 2-2 Configuring Remote Management
In the Remote Management section, configure the following parameters and click OK to
specify the IP subnet and mask for remote management.
Subnet/Mask
Status
2.3
System Setting
Choose the menu System Tools > Admin Setup > System Settings to load the following
page.
Figure 2-3 Configuring System Settings
In the Settings section, configure the following parameters and click Save.
Enter the IP Subnet and Mask of the remote host.
Check the box to enable the remote management function for the remote host.
Admin Setup
Configuration Guide
158