Adjusting The Operation Panel Position - Brother 884-T20 Operation Manual

d Use the included wrench to turn the
adjustable foot nut on the foot.
Turning the nut in direction 1 lengthens the leg;
turning the nut in direction 2 shortens the leg.
1 Adjustable foot nut
• Adjust all four legs so that they securely contact the
desk or table, and the machine is level.
e After adjusting the legs to the desired
length, use the included wrench to tighten
the nuts.
1 Lock nut
f Press down on each corner of the
embroidery machine to check that it is
stable.
If it is still unstable, perform steps
again to adjust the legs.
Adjusting the operation panel
position
Adjust the orientation and angle of the operation
panel so it can easily be operated.
a
b
c
c e
through
Loosen 2 thumb screws to bring the
operation panel forward.
1 Thumb screws
Adjust the operation panel to an easy-to-
operate position, and then tighten the
thumb screws.
Adjust the orientation of the operation
panel.
Loosen the thumb screw, adjust the operation panel to
an easy-to-view orientation, and then tighten the
thumb screw.
1 Thumb screw
GETTING READY
1
25