Adjusting The Operation Panel Position - Brother PR650e Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Adjusting the operation
panel position
Adjust the orientation and angle of the operation
panel so it can easily be operated.
1 Loosen 2 thumb screws to bring the
operation panel forward.
1 Thumb screws
2 Adjust the operation panel to an easy-to-
operate position, and then tighten the thumb
screws.
3 Adjust the orientation of the operation
panel.
Loosen the thumb screw, adjust the operation
panel to an easy-to-view orientation, and
then tighten the thumb screw.
1 Thumb screw
4 Adjust the angle of the operation panel.
Loosen the 2 thumb screws behind the
operation panel, adjust the operation panel to
an easy-to-view angle, and then tighten the
thumb screws.
(Side view)
1 Thumb screws
Note
● Using the disc-shaped screwdriver
included, loosen and firmly tighten the
five thumb screws.
Setting Up the Machine 27
1
(Top view)