Sending Embroidery Patterns From A Computer To The Machine (Link Function); Operations Available With The Link Function - Brother 884-T20 Operation Manual

Sending Embroidery
Patterns From a
Computer to the Machine
(Link Function)
This machine is compatible with the Link function.
This function allows embroidery patterns edited in
embroidery editing software provided with the
Link function, such as PE-DESIGN NEXT or later,
to be transferred from a computer to multiple
embroidery machines. As many as 100
embroidery patterns can be transferred to an
embroidery machine, and the embroidering status
of the patterns being transferred can be viewed
from the computer monitor.
Use the included USB cable to connect the
embroidery machine to a computer.
Operations available with the
Link function
■ Send multiple embroidery patterns
to connected embroidery machines
142
■ Check the sewing status of the
embroidery machine (this model)
from the computer
(Example of multiple machines connected)
Memo
• When connecting multiple embroidery
machines to the computer, use a
commercially available USB hub.
Please note that we recommend you use a
self-powered USB hub. Do not use USB
extension cables or repeater cables. For
details on using the USB hub, refer to its
operating instructions.