Using The Optional Bobbin Winder; Precautions; Optional Bobbin Winder And Its Accessories - Brother 884-T20 Operation Manual

Using the Optional
Bobbin Winder
When winding the bobbin thread onto a metal
bobbin, use the optional bobbin winder. The
procedures for using the optional bobbin winder
are described below.

Precautions

For precautions concerning the power supply,
refer to page 29.
CAUTION
• Be sure to place the bobbin winder on a level,
stable surface.
• Only use the bobbins supplied with this
bobbin winder.
Optional bobbin winder and its
accessories
Check that the following bobbin winder and
accessories are included.
1.
3
2
4
1
1 Main power switch
2 Bobbin winder shaft
3 Hole for thread guide
4 Hole for spool pin
5 DC input connector
2.
Spool pin
XC5949-051
3.
Spool cushion
XA0679-050
4.
5.
6.
7.
8.
9.
10.
Part Name
Part Code
Bobbin
winder
PRBW1
5
Thread guide
XC6644-151
AC adapter*
–
Power supply cord*
–
Metal bobbin × 5
100376-051
Spool cap
130012-054
Weight (L)
XC5974-151
Weight (S)
XC6631-051
* Visit your authorized Brother dealer.
Memo
• The part code of the bobbin winder set may
differ depending on the country/area where
the machine was purchased.
• Depending on the model you purchased,
the bobbin winder may be included with the
machine.
APPENDIX
Part Name
Part Code
7
205