Panasonic BT-M2090Y Service Manual page 25

Setting value change
• Set for displaying the adjustment mode menu or the
adjustment mode sub-menu.
1. Press the right arrow (--+] to change the adjustment value
in the + direction.
2. Press the left arrow
1~1
to change the adjustment value in
the - direction.
3. Press the up
I
j J or down arrow
I J, J
to change the
adjustment item.
4. Press Menu to return the set-up main menu. (At the
adjustment mode sub-menu, again press Menu.)
Set-up menu exit
1.
When settings are complete, press Menu.
2. The screen display extinguishes and the set-up menu is
exited.
Set-up menu checks
• White balance
To check if adjustment has changed:
1. Press Menu to display the user main menu.
2. If an asterisk
n
appears at the Color Temp. item, the
setting has been changed.
• Set-up menu initialize
To return changed Size/Centering and White Balance
Adjust to original status (initialize);
1. Hold the mainframe down arrow
I
J,
l
and Menu
depressed, and set power on (inoperable from remote
controller).
2. The initialize menu is displayed (hold depressed until
menu appears).
3. Select Set-up Menu Reset and press Enter.
4. The set-up reset menu is displayed.
5. Press Enter to return the standard settings. Note that
Remote Elect, Status Display and Control Lock are
initialized and
ID
No. is cleared to
o.
-25-
< MENU>
ASPECT
RATIO
COLOR TEMP.
:4-3 .
:6500*
RGB/COMPONENT : RGB
User main menu
<INITIALIZE MENU>
ID NUMBER SET
• <SET-UP MENU> RESET
Initialize menu
<SET-UP MENU> RESET
Are you sure 7
"Yes"
then [ENTER)
"No" then
[~Jori-+]
Set-up reset menu
01•Mili:U~UJ