Panasonic BT-M2090Y Service Manual page 15

Tab(!)
•
CD
@
0
@
@
Tab
CD
0
@
@
Tab(?)
Tab (?) Tab G)
I
CD
I
Tab@
Ground Screw
.., ,-1w1~vvv 1
• input PWB
1 .
Remove the top cover and rear panel.
2. Take out 2 screws Q).
3. While pressing the lower signal PWB, pull upward and
remove the input PWB. Use care regarding the tabs and
engage the PWB to enable powered checks .
• Power supply PWB
1. Remove the top cover and rear panel.
2. Take out 2 screw Q).
3. While raising the PWB, insert a screwdriver or similar tool
to disengage tabs 1, 2 and 3, then remove the PWB.
• Deflection PWB
1. Remove the top cover and rear panel.
2. Take out 1 screw Q).
3. While raising the PWB, insert a screwdriver or similar tool
to disengage tabs 1, 2 and 3, then remove the PWB.
-15-