Panasonic BT-M2090Y Service Manual page 24

D 1-M~U~UT
Set-up menu entry
1. While holding Enter depressed, press Menu.
2. The Set-up menu is displayed on the screen.
Item selection
• Size/centering, white balance adjust,
remote select
• Size/centering items are displayed only when RGB
input is selected.
1.
Press the up [ j ] or down arrow [
-!, ]
to select
Size/Centering items.
2. After selecting the item, press Enter.
3. The adjustment mode menu is displayed.
4. Again press Enter to display the adjustment mode sub-
menu for each adjustment item (select adjustment item
with up [
j ]
or down arrow [
-!, ] ).
5. Press Menu to display the original adjustment mode
menu.
6. Perform in the same manner for White balance adjust
and Remote select.
• Status display
1. Press the up [ j
l
or down arrow [
-!,
l
to select the
status display items.
2. Press the left
[sf-]
or right arrow
1~1
to select on/off.
• Control lock
• Except for sound volume, all control operations are
inhibited from the front control buttons, Phase,
Chroma, Bright and Contrast controls, and the remote
controller (sound volume remains operational).
1 . Press the up [ j
l
or down arrow [
-!,
l
to select Control
Lock.
2. Press the left
[sf-]
or right arrow
1~1
to select on/off.
3. The status just prior to selecting On is held and after
exiting the set-up main menu, control adjustment is
inhibited.
4. To release the control lock, press Enter and Menu to
display the set-up main menu, then set Control Lock to
Off.
-24-
<SET-UP MENU>
~
SIZE/CENTERING
WHITE BALANCE ADJUST
REMOTE SELECT
STATUS DISPLAY :ON
CONTROL LOCK :OFF
Set-up main menu
<SIZE/CENTERING>
~ H.SIZE
V.SIZE
H.POSITION
V.POSITION
: +05
: -05
: +03
: -07
Adjustment mode menu
H.SIZE : +05
I
V.SIZE : -05
I
H.POSITION : +03
I
V.POSITION
: -07
Adjustment mode sub-menu
H.SIZE-V.SIZE-H.POSITION-V.POSITION