Trouble Shooting - Parkside PSSA 18 A1 Original Instructions Manual

GB

Trouble Shooting

Problem
Appliance
won't start
Intermittent op-
eration
Poor sawing
performance
Saw blade
quickly be-
comes blunt
20
Possible cause
Battery ( 11) discharged
Battery ( 11) not inserted
Switch lock ( 11) has not
been operated properly
On/Off switch (
tive
Internal loose contact
On/Off switch (
tive
Saw blade unsuitable
for the work piece to be
worked on
Saw blade blunt
Incorrect sawing speed
Low battery power
Saw blade unsuitable
for the work piece to be
worked on
Too much pressure applied
Sawing speed too high
Corrective action
Recharge battery (see „Charging")
Insert battery (see „Operation")
Switch on (see "Operation")
7) defec- Send in to Service Centre for repair
Send in to Service Centre for repair
7) defec-
Insert a suitable saw blade
Insert a new saw blade
Adjust sawing speed
Charge battery (
ing process")
Insert a suitable saw blade (see "In-
stallation")
Reduce the pressure
Reduce the sawing speed
11) (see "Charg-