Servicing The Spark Plug-Exmark 708Cc Engine - Exmark RADIUS Operation Manual

Maintenance
A B
C D
F
E
g027477
Figure 45
Note: Ensure the oil filter gasket touches the
engine, then an extra 3/4 turn is completed.
Note: Dispose of the used oil at a recycling
center.
6. Slowly pour approximately 80% of the specified
oil into the filler tube—use oil recommended
in the Checking the Engine Oil–Kawasaki
Engine section.
A
C
E
3/4
7. Check the oil level; refer to Checking the
Engine Oil–Kawasaki Engine section.
8. Start the engine and check for leaks.
Servicing the Spark
Plug-Exmark 708cc Engine
Service Interval: Every 100 hours/Yearly
Ensure that the air gap between the center and side
electrodes is correct before installing the spark plug.
Use a spark plug wrench for removing and installing
the spark plug and a gapping tool or feeler gauge to
check and adjust the air gap. Install a new spark plug
if necessary.
Type: Champion RN9YC or equivalent
48
B
D
F
g027660
Figure 46
(whichever comes
first)—Check the spark
plug (Exmark 708cc
engine).
Every 200 hours/Every 2
years (whichever comes
first)—Replace the spark
plug (Exmark 708cc
engine).