Upnp - NETGEAR WNR612 User Manual

Netgear WNR612 Wireless Router User Manual
The remote management function allows you to configure the router in the WAN
through the Web browser. In this way, you can manage the router from a remote
host.
The following table describes parameters in this page:
Field
Turn Remote
Management Enable or disable remote Web management.
On
IP address that is used to access the router from the Internet. The
Remote
default is http://0.0.0.0:8080. When accessing the router, you need
Management
to enter the WAN IP address of the router, along with : and the port
Address
number in the address bar (of IE) or the location bar (of Netscape).
Set the IP address of the computer on which remote Web
management is carried out to access the router.
Only This Computer: Only the specified IP address can
Allow Remote access the router. You need to enter an IP address.
Access By IP Address Range: A number of IP addresses on the Internet
can access the router. You need to enter the starting and
ending IP addresses to specify the range.
Everyone: Everyone on the Internet can access the router.
Specify the port of Web management for accessing the broadband
Port Number
router.
After setting, click Apply to save the settings.
6.7.10

UPnP

By using the Universal Plug and Play (UPnP) protocol, a host at the LAN side can
ask the router to realize specific port conversion, so that an external host can
access resources on the internal host when necessary. For example, if MSN
Messenger is installed on Windows ME and Windows XP operating systems,
UPnP can be used for audio and video conversations. In this way, functions
restricted by NAT can work properly.
Click UPnP on the left pane of the page to display the following page.
Description
96