NETGEAR WNR612 User Manual page 26

Netgear WNR612 Wireless Router User Manual
Enter the account name provided by the Internet service provider
(ISP) in the Account Name field. If the ISP does not provide it, you
need not modify it.
In this mode, the WAN port of the wireless router obtains the
network property information, including the IP address, subnet
mask, gateway, and IP address of the DNS server, from the
connected DHCP server
After setting, click Apply to save the settings, and then the Router
Status page appears. You can view the parameters of WAN
connection type in this page. The setup wizard is now complete.
(2) If the detected Internet type is Static IP (Fixed), the following figure
appears:
Click Next and the following figure appears:
The following table describes parameters in this page:
23