Wireless Connection Introduction - NETGEAR WNR612 User Manual

Netgear WNR612 Wireless Router User Manual
Note:
192.168.1.1 in the ping command is the default IP address of the LAN
interface. If the IP address changes, enter the current IP address instead.
Step 7 If the PC can ping through the default IP address of the wireless router,
the following page appears, indicating that the connection between your
PC and the wireless router is normal.
4.2

Wireless Connection Introduction

By default, the AP function of the wireless router is enabled. If you use a wireless
network adapter, do as follows to establish the connection:
15