Configuration File; Overview; Make A Backup Of The File; Open A File - Bosch Plena Software Manual

Plena Voice Alarm System | Software Manual | Action Programming
8

Configuration file

8. 1

Overview

The Save configuration file button saves the
configuration to your PC. The configuration file is saved
as a *.dat file and takes the name of the day that the file
was originally saved as the name of the file. This is a
default setting. The file can be used either as an in-
progress file or a back-up file when the configuration is
complete.
The Open configuration file opens and restores a saved
configuration file to the Plena Voice Alarm System
Configuration Software. The file can be used to down
load or restore default settings to the system or, used to
make parallel systems.
Note
The default configuration of the Voice Alarm
System is as follows:
• One channel system
• One controller, no routers
• One call station no key pads
• Supervision is ON according to IEC
60849.
Note
In the default configuration the spare amplifier
supervision is ON, if no spare amplifier is
connected, the system will not have BGM.
8.1.1

Make a backup of the file

Proceed as follows:
1 Select the Save configuration file from the Main
Menu.
2 Type the name of the configuration file, or click the
Save button to keep the default name.
Bosch Security Systems | 2005-10 | 9922 141 10384 en
figure 8. 1 Save As dialog box
8.1.2

Open a file

A configuration file can be loaded to a PC. The software
contains a default file that can be used to restore the
defaults settings to a system, or be used as a basis for a
new configuration file. The files are listed with the date
of first save as part of the file name. Proceed as follows:
1 Select the Open configuration file from the Main
Menu.
2 Select the name of the configuration file from the
dialog window.
3 Click the Open button.
en | 41