Router; Call Station; Introduction; Main - Bosch Plena Software Manual

Plena Voice Alarm System | Software Manual | Action Programming
7.3

Router

Use the tabs to select the items for which the actions are
programmed:
• Emergency trigger inputs (EMG trigger)
Note
Programming the actions of the emergency
trigger inputs of a voice alarm router is similar to
programming the actions of the emergency
triggers inputs of a voice alarm router. See
section 7.2.3 for more information.
• Business trigger inputs (Business trigger)
Note
Programming the actions of the business trigger
inputs of a voice alarm router is similar to
programming the actions of the business
triggers inputs of a voice alarm router. See
section 7.2.4 for more information.
Bosch Security Systems | 2005-10 | 9922 141 10384 en
7.4

Call station

7.4.1

Introduction

Use the tabs to select the items for which the actions are
programmed:
• Call station (Main)
• Call station keypads (Keypad).
7.4.2

Main

See figure 7.10 for an overview of the Main tab.
figure 7. 1 0: Main
Proceed as follows:
1 Select the priority that is assigned to the messages by
the calls station from the Priority drop-down list.
2 Select the message or chime that is played at the start
of the call from the Pre-chime drop-down list.
3 Select the message or chime that is played at the end
of the call from the Post-chime drop-down list.
en | 37