External Sources; Listening To External Sources; Maintenance - Philips FW C798 User Manual

External Sources

STANDBY-ON
ECO POWER
DISPLAY PROG
DEMO
PLAY•
STOP/
PAUSE
CLEAR

Listening to External Sources

1
Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
2
Press AUX (CDR/DVD) repeatedly to select
CDR/DVD mode or normal AUX mode.
"CDR/DVD" or "AUX" will be displayed.

Maintenance

Cleaning the Cabinet
¶ Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
¶ When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the center
out. Do not wipe in a circular
motion.
¶ Do not use solvents such as
benzine, thinner, commercially
available cleaners, or antistatic spray intended for
analog records.
Cleaning the disc lens
¶ After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with the
cleaner.
28
pg 001-032/C798/37-Eng
MUSIC LEVEL
INTERACTIVE VU MET
CLOCK• AUTO
DUBBING REC
TIMER REPLAY
CD 1•2•3 FM •AM
CD TUNER
SOURCE
WOOX
ON • OFF LEVE
OO
TAPE AUX W X
DYNAMIC
AMPLIFICATION
CONTROL
TAPE 1•2 CDR / DVD
¶ To ensure good recording and playback quality,
¶ Use a cotton swab slightly moistened with
¶ You also can clean the heads by playing a
¶ Use a demagnetizing tape available at your
28
When CDR/DVD mode is selected, any audio
equipment connected to the LINE OUT
terminals of this mini system will be muted. You
will not be able to record or listen to the sound
from the LINE OUT source.
If the sound from the external source is
distorted, select CDR/DVD mode for listening.
Notes:
– You are advised not to listen to and record from
the same source simultaneously.
– All the navigation sound control features (DSC
or VAC for example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to "Tape
Operation/Recording".
Cleaning the Heads and the Tape Paths
A
clean the heads , the capstan(s)
C
pressure roller(s) after every 50 hours of
tape operation.
cleaning fluid or alcohol.
cleaning tape once.
C B A B
Demagnetizing the heads
dealer.
4/16/02, 6:41 PM
B
, and
C
3139 115 21261