Switching The System On; Switching The System To Standby Mode; Switching The System To Eco Power Standby Mode; Power Saving Automatic Standby - Philips FW C798 User Manual

Basic Functions

Switching the system on

In Standby/Demonstration mode
Press STANDBY ON.
The system will switch to the last selected
source.
Press CD, TUNER, TAPE, AUX (or CD 123,
TUNER, TAPE 1/2 or AUX/CDR on the
remote control).
The system will switch to the selected source.
Press any one of the DISC DIRECT PLAY
buttons.
The system will switch to CD mode.
In Eco Power Standby mode
Press ECO POWER.
The system will switch to last selected source.
Press CD 123, TUNER, TAPE 1/2 or AUX/
CDR on the remote control.
The system will switch to the selected source.
Switching the system to Standby
mode
In Demonstration mode
Press and hold DEMO STOP Ç on the
system.
In any other source mode (except Eco
Power Standby mode)
Press STANDBY ON (or B on the remote
control).
The clock will appear on the display when the
system is in Standby mode.
Switching the system to Eco
Power Standby mode (< 1 Watt)
Press ECO POWER (or press and hold B on
the remote control).
"ECO POWER" will be displayed, then the
display screen will go blank.
The low power ECO POWER LED will be
lighted.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power Standby or Standby mode.
16
pg 001-032/C798/37-Eng

Power Saving Automatic Standby

As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc or tape has stopped playing.

Display mode

There are four different display modes for
selection.
Press DISPLAY repeatedly to select NORMAL,
MODE 1, MODE 2, or MODE 3.
NORMAL ........ All available LEDs will light up
MODE 1 .......... All available LEDs will light up
MODE 2 .......... All available LEDs will light up
MODE 3 .......... The display screen will be at half

Volume Control

Adjust VOLUME to increase (turn knob
clockwise or press VOLUME +) or decrease
(turn knob counter-clockwise or press
VOLUME -) the sound level.
To listen through the headphones
Connect the headphones plug to the n socket
at the front of the system.
The speakers will be muted.
To switch off the volume temporarily
Press MUTE on the remote control.
Playback will continue without sound and
"MUTE" will be displayed.
To restore the volume, press MUTE again or
increase the VOLUME level.
16
and the display screen will have
full brightness. The VU meter will
be in music mode.
and the display screen will have
full brightness. The VU meter will
be in volume mode.
and the display screen will be at
half brightness. The VU meter
will be in music mode.
brightness. The VU meter and all
LEDs will be off.
3139 115 21261
4/16/02, 6:39 PM