Tuning To Preset Radio Stations; Erasing A Preset Radio Station - Philips FW C798 User Manual

Radio Reception
Manual Preset Programming
1
Press TUNER (FM•AM) repeatedly to select
the desired waveband : FM or AM.
2
Press PROG.
will start flashing.
PROG
The next available preset number will be
displayed for selection.
3
Press and hold à or á until the frequency
indication starts to change, then release.
The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
To store the radio station to another
preset number
Press í or ë to select the desired preset
number.
4
Press PROG again to store the radio station.
will disappear from the display.
PROG
Repeat steps 2–4 to store other preset radio
stations.
Tuning to a weak radio station
Press à or á briefly and repeatedly until the
optimal reception is found.
To stop storing the manual preset
Press Ç on the system.
Notes:
– If you attempt to store more than 40 preset
radio stations, "PROGRAM FULL" will be
displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.

Tuning to Preset Radio Stations

Once you've preset the radio stations, press í
or ë to select the desired preset number.
The preset number, radio frequency, and
waveband will appear on the display.
22
pg 001-032/C798/37-Eng

Erasing a Preset Radio Station

1
Press í or ë to select the preset radio station
to be erased.
2
Press and hold Çon the system until "PRESET
DELETED" appears on the display.
The radio frequency remain on the display.
The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
Repeat steps 1–2 to erase other preset radio
stations.
For Recording, please refer to "Tape
Operation/Recording".
22
3139 115 21261
4/16/02, 6:40 PM