External Sources; Listening To External Sources; Maintenance - Philips MZ-9 User Manual

CD CHANGER
FRONT
INCREDIBLE
SURROUND
LOUDNESS
FLAT
SOUND
3 CDC
PRESET
TUNER
SEARCH/TUNE
PRESET STOP
BASS
TAPE
CDR/AUX

Listening to external sources

1
Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
2
Press CDR/AUX to select external equipment.
"AUX/DVD" or "CDRW" is displayed.
Cleaning the Cabinet
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out. Do not wipe in circular
motion.
Do not use solvents such as
benzene, thinner, commercially available cleaners,
or antistatic spray intended for analogue records.
Cleaning the disc lens
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
pg 001-030_MZ9_22-Eng
NEWS DIM
BACK
T.A. SLEEP
REC HSD TRACK PRESET REPEAT AM LW MW FM STEREO PROGRAM TIMER SHUFFLE
VOLUME
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
DIGITAL STEREO HIFI SYSTEM
A•B
DIGITAL CONTROL
PLAY / DIM PROG/A. REV REC/CD SYN
FLAT
TREBLE
INCREDIBLE
SURROUND LOUDNESS
27

External Sources

When CDRW mode is selected, any audio
equipment connected to the LINE OUT
terminals of this mini system will be muted. You
will not be able to record or listen to the sound
from the LINE OUT source.
If the sound from the external source is
distorted, select CDRW mode for listening.
Notes:
– You are advised not to listen to and record from
the same source simultaneously.
– All the sound control features (Bass/Treble or
Incredible Surround for example) are available for
selection.
– Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to "Tape
Operation/Recording".

Maintenance

Cleaning the Heads and the Tape Paths
To ensure good recording and playback quality,
A
clean the heads , the capstan(s)
C
pressure roller(s) after every 50 hours of
tape operation.
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You also can clean the heads by playing a
cleaning tape once.
C B A B
Demagnetising the heads
Use a demagnetising tape available at your
dealer.
1/23/02, 1:59 PM
B
, and
C
27
3139 115 21511