SL2100 PC Programming Manual
Figure 6-21 Add Range Screen
4.
Another window will open where you can enter the Received DID digits
(enter the last four digits) and where you want the DID to go (Target). If
there are multiple DID's which are in consecutive sequential order and are
going to Target's which are also in consecutive sequential order, then enter
the first DID and first Target and set the Count field to the number of DID's.
The system will automatically assign the range of DID's.
The buttons at the bottom of the window are the system Operation
Modes. Select the Mode which the DID or DID range will operate.
If the DID is going to the same location 24 hours a day, choose the
Day button. If the system will not use Night Mode, choose the Day
button.
NOTE
Figure 6-22 DID Add Range
Issue 1.0
6-15