Assigning Function Keys - NEC SL2100 Programming Manual

Issue 1.0
To assign a group of ports with extension numbers:
1.
2.
3.
4.
Example
To assign telephone ports 001~099 with extension numbers 301~399:
1.
2.
3.
4.
5.
The result is...
NOTE
S 6 A
ECTION SSIGNING
The Function Keys multi-assignment dialog enables you to setup a group of function
keys for individual or multiple telephones. The dialog is best used if you need to set
up many telephones to have the same set of function keys. The function layout can
also be saved as a template to use when needed.
A-6
Select the type of extensions you want to apply.
Specify the port range over which to iterate.
Specify the extension number to begin the assignment. (Leave this field blank
to clear the extension numbers).
Click the Apply button to trigger the assignment.
To assign station numbers select 11-01: Extension Numbering as our extension
type.
Place a 1 in the Begin at Station Port edit box.
Place a 99 in the End at Station Port edit box.
Place 301 in the Begin the assignment use the extension edit box.
Click Apply.
Port 001 = Ext 301
Port 002 = 302
Port 003 = 303
...
Port 099 = 399
The extension numbers must validate against the numbering plan setup in
PRG-11-01. In addition, duplicate extension numbers cannot exist. In this case,
free the extension numbers by assigning a blank to the ports using those
extension numbers.
F
UNCTION
K
EYS