Removing A Card - NEC SL2100 Programming Manual

3.3
SL2100 PC Programming Manual
5. Select the desired card package you want to add.
The slot changes appearances to indicate the card that is installed, the firmware
version, the port type and the port range that is used.

Removing a Card

To remove a card, complete the following steps:
1. With the mouse, right click on the card you want to remove.
2. When the popup menu is displayed, select Delete Card.
The card is removed and the slot and port type range it was utilizing is now
available for use by another card.
Issue 1.0
4-5