Sony BDP-CX7000ES Service Manual page 93

Pin No. Pin Name
K29 UA0DSRB
K30 UA0CTSB
K31 UA0DTRB
K32 UA0RSTB
K33 UA0RXDB
L1 GND
UMDQ9, UMDQ12,
L2 to L4
UMDQ8
L5 UMVDD18
L6 GND
L7 UMVDD18
L27 SCL1
L28 SCL0
L29 UA0TXDB
L30 UA0DCDB
L31 GND
L32 DVDDYC
L33 AGNDYC
M1 UMCK0
M2 GND
M3, M4 UMDQ13, UMDQ14
M5 GND
M6 UMVDD18
M7 GND
M27 SDA1
M28 SDA0
M29 UA0RIB
M30 GND
M31 VAY
M32 GND
M33 VAC
N1 UMCKB0
N2 GND
N3 UMDM1
N4 UMDQ11
N5 UMVDD18
N6 GND
N7 UMVDD10
N13 PLS0VDD
N14 PLS0GND
N15 GND
N16 VDD10
N17 GND
N18 VDD10
N19 GND
N20 PLAUVDD
N21 PLA2VDD
N27 AVDDYC
N28 AGNDYC
N29 VACOMPYC
N30 VAREFYC
N31 to
GND
N33
P1 GND
P2, P3 UMDQ2, UMDQ15
P4 GND
P5 UMVDD18
P6 GND
P7 UMVDD10
P13 PLSYVDD
I/O
I Start bit signal input from the system controller
O Interlace/progressive selection signal output terminal
O Not used
O Not used
I Not used
- Ground terminal
I/O Two-way data bus with the SD-RAM
- Power supply terminal (+1.8V)
- Ground terminal
- Power supply terminal (+1.8V)
O I2C clock signal output to the digital video format converter
O I2C clock signal output to the HDMI transmitter
O Not used
I Not used
- Ground terminal
- Power supply terminal (+3.3V) (digital system)
- Ground terminal (analog system)
O Clock signal (positive) output to the SD-RAM
- Ground terminal
I/O Two-way data bus with the SD-RAM
- Ground terminal
- Power supply terminal (+1.8V)
- Ground terminal
I/O Two-way I2C data bus with the digital video format converter
I/O Two-way I2C data bus with the HDMI transmitter
O Reset signal output to the HDMI transmitter
- Ground terminal
O S-video (Y) signal output terminal
- Ground terminal
O S-video (chroma) signal output terminal
O Clock signal (negative) output to the SD-RAM
- Ground terminal
O Data mask signal output to the SD-RAM
I/O Two-way data bus with the SD-RAM
- Power supply terminal (+1.8V)
- Ground terminal
- Power supply terminal (+1.05V)
- Power supply terminal (+1.05V) (for PLL)
- Ground terminal (for PLL)
- Ground terminal
- Power supply terminal (+1.05V)
- Ground terminal
- Power supply terminal (+1.05V)
- Ground terminal
- Power supply terminal (+1.05V) (for PLL)
- Power supply terminal (+1.05V) (for PLL)
- Power supply terminal (+3.3V) (analog system)
- Ground terminal (analog system)
- External capacitor connection terminal
- Reference voltage Input terminal
- Ground terminal
- Ground terminal
I/O Two-way data bus with the SD-RAM
- Ground terminal
- Power supply terminal (+1.8V)
- Ground terminal
- Power supply terminal (+1.05V)
- Power supply terminal (+1.05V) (for PLL)
Description
Not used
"L": reset
Not used
Not used
Not used
Not used
BDP-CX7000ES
93