Sony BDP-CX7000ES Service Manual page 89

• IC Pin Function Description
MB-124-MEGA-EJ BOARD IC101 MC-10092F1-207-RNA-A (BD DECODER)
Pin No. Pin Name
A3 VDD3
A4 PCIAD17
A5 PCITRDYB
A6 GND
A7, A8 PCIAD11, PCIAD5
A9 VDD3
A10 VODY6
A11 VODC6
A12 AOHBD1
A13 GND
A14 SAGNDANA
A15 SACREFN
A16 SAGNDDIG
A17 SATXN1
A18 SAGNDDIG
A19 SARXP1
A20 SAGNDDIG
A21 SATXN0
A22 SAGNDDIG
A23 SARXP0
A24 SAGNDDIG
A25 GPIO20
A26 GND
A27 GPIO14
A28 GPIO4
A29 EJTCK
A30 EJTRST
A31 EJDINT
PCIAD23, PCIAD21,
B2 to B4
PCIAD18
B5 PCIIRDYB
B6 PCIPAR
PCIAD12, PCIAD6,
B7 to B9
PCIAD0
B10 VODY0
B11 VODY4
B12 VODC8
B13 IPODC2
B14 SAVDDANA
B15 SACREFP
B16 SAGNDDIG
B17 SATXP1
B18 SAGNDDIG
B19 SARXN1
B20 SAGNDDIG
B21 SATXP0
B22 SAGNDDIG
B23 SARXN0
B24 SAGNDDIG
B25 GPIO18
B26 GPIO19
B27 GPIO9
B28 GPIO10
B29 EJTMS
B30 EJTDO
B31 EJTDI
B32 ATX
I/O
- Power supply terminal (+3.3V)
I/O Two-way address and data bus with the USB interface
I/O Target ready signal input/output with the USB interface
- Ground terminal
I/O Two-way address and data bus with the USB interface
- Power supply terminal (+3.3V)
O Digital video (Y) signal output to the digital video format converter
O Digital video (Cb/Cr) signal output to the digital video format converter
O Audio signal output to the HDMI transmitter
- Ground terminal
- Ground terminal (analog system)
I Not used
- Ground terminal (digital system)
O Not used
- Ground terminal (digital system)
I Not used
- Ground terminal (digital system)
O Serial data (negative) output to the DR-510 board
- Ground terminal (digital system)
I Serial data (positive) input from the DR-510 board
- Ground terminal (digital system)
O SDC output control signal output to the video amplifi er
- Ground terminal
O Request signal output to the system controller
I/O Not used
I Clock signal input terminal (for JTAG)
I Reset signal input terminal (for JTAG)
I Debug interrupt signal input terminal (for JTAG)
I/O Two-way address and data bus with the USB interface
I/O Initiator ready signal input/output with the USB interface
I/O Parity signal input/output with the USB interface
I/O Two-way address and data bus with the USB interface
O Digital video (Y) signal output terminal
O Digital video (Y) signal output to the digital video format converter
O Digital video (Cb/Cr) signal output to the digital video format converter
I/O Not used
- Power supply terminal (+1.8V) (analog system)
I System clock signal input from the clock generator
- Ground terminal (digital system)
O Not used
- Ground terminal (digital system)
I Not used
- Ground terminal (digital system)
O Serial data (positive) output to the DR-510 board
- Ground terminal (digital system)
I Serial data (negative) input from the DR-510 board
- Ground terminal (digital system)
O Video muting on/off control signal output to the video amplifi er
I/O Not used
O Reset signal output to the USB interface
I/O Not used
I Mode selection signal input terminal (for JTAG)
O Data output terminal (for JTAG)
I Data input terminal (for JTAG)
O S/PDIF signal output terminal
Description
Not used
Not used
Not used
Not used
"L": reset
Not used
Not used
Not used
BDP-CX7000ES
"L": muting on
89