Samsung ML-6050 Service Manual page 59

Error code 2-010
Fault
Wrong print position
Description
Printing begins at wrong position on the paper.
Check
Feed sensor actuator, LSU, Pick-up ass'y, Bracket-dust, Solenoid, Video Controller.
Cause
1. Wrong sence time caused by defective feed sensor actuator.
2. Skew:
Bad LSU-assembling
Uneven pressure force of the pick-up ass'y
Defective mechanical parts
3. Top margin;
Early feeding by the solenoid
Wrong OP1 sensor position
Wrong video controller connection
Solution
1. Replace the defective actuator.
2. Reassemble or replace the LSU.
Reassemble or replace the pick-up ass'y.
Reassemble or replace the defective mechanical parts. (for example, Bracket-dust).
3. Replace the solenoid.
Check OP1.
Check the Vedio Controller or its connection.
Remark
Others
Samsung Electronics
Troubleshooting
Model ML-xxxx
5-27