Samsung ML-6050 Service Manual page 48

Troubleshooting
Error code 1-093
Fault
Ghost (4)
Description
When printing on card stock or transparencies using manual feeder, ghost occurs at 94 mm intervals.
Check
1. Selected paper type in the software application
2. Engine board
Cause
1. When printing on card stock or transparencies, higher transfer voltage is required. Select 'Thick
Mode' on paper type menu from the software application.
2. Defective transfer voltage terminal in the engine board.
Solution
1. Select 'Thick Mode' on paper type menu from software application to print on card stock or
transparencies.
2. If the transfer voltage in the engine board is out of specification, refer to Error Code 1-091
Remark
Others
5-16
Model ML-xxxx
Samsung Electronics