Samsung ML-6050 Service Manual page 21

6. Unlatch the front ends of the cover.
4-7. LSU
1. Before you remove the LSU, you should remove:
-Controller Board (see page 4-3)
-Main Cover (see page 4-6)
2. Remove two screws securing the fuser cover, and
remove the fuser cover.
Samsung Electronics
7. Slide the main cover upward, out of printer.
Note that the power switch is
properly released from the cover.
3. Remove three screws, and remove the LSU. Then
unplug two connectors from the LSU.
Disassembly and Reassembly
4-7